SmartPairing™
1 On the computer, open a command line interface.
2 Start a Telnet session using the Polycom HDX system’s IP address and
port number — for example, telnet 10.11.12.13 24.
3 Enter the HDX admin password if required.
4 Type the following to enable SmartPairing:
systemsetting uspairingenabled auto
SmartPairing in automatic mode is enabled
'Polycom > HDX' 카테고리의 다른 글
HDX6000 Resolution (0) | 2016.04.26 |
---|---|
HDX Factory reset (0) | 2014.07.03 |