CUCM7 Features 8 Extension Mobility configuration

Extension Mobility configuration

 

Task 1: Verify Extension Mobility Service is Running

Step 1 From the Navigation menu select Cisco Unified CallManager Serviceability

 

Step 2 Select Tools>Control Center ? Feature Services

Step 3 Make sure that the Cisco Extension Mobility service shows status Activated

Task 2:Configure Extension Mobility Service

Step 1 From the Navigation menu select Cisco Unified CallManager Administration

Step 2 Select Device>Device Settings>Phone Services

Step 3 Click Add New

Step 4 In the Service Name field, type Extension Mobility

Step 5 In the Service Description field, type Login and logout service

Step 6 In the Service URL field, Enter the following URL (where X is your pod number): http://10.X.1.2:8080/emapp/EMAppServlet?device=#DEVICENAME#

Step 7 Click Save

 

 

 

 

 

 

 

 

Task 3: Modify Enterprise Parameters to Reflect IP Address of CallManager

Step 1 Select System>Enterprise Parameters

 

 

 

 

 

 

 

 

 

 

Step 2 Under Phone URL parameters, change all fields from <CityName>CM1:8080 to 10.X.1.2:8080. Change ONLY the host name, not the reset of the field.

Step 3 Click Save

Step 4 Click Ok from the pop-up warning.

Step 5 Click Reset

Step 6 In the pop-up window select Reset

Step 7 Click Close

 

 

 

 

 

 

 

 

 

 

Task 4: Create Device Profile Default for Each Phone Model that shall Support Cisco Extension Mobility

Step 1 Select Device>Device Settings>Default Device Profile

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 2 From the drop down list, select the phone model to be configured, for example, Cisco 7941.

Step 3 Under Description, enter a description of this profile.

Step 4 Under Phone Button Template, select Standard 7960 SCCP.

Step 5 Click Save

Step 6 Repeat for each model phone to be configured

 

 

 

 

 

Task 5: Create Device User Profile for a User

Step 1 Choose Device>Device Settings>Device Profile and click Add New.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 2 From the drop down list, select the phone model to be configured, for example, Cisco 7960

Step 3 Click Next

 

 

 

 

 

 

 

 

Step 4 Enter a Device Profile Name, for example "Your Name" .

Step 5 From the Phone Button Template field, select Standard 7960 SCCP.

Step 6 Click Save.

 

 

 

 

 

 

 

Step 7 On the left hand side of the screen, click the link Line [1] ? Add a new DN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 8 Choose a valid DN from your NIP, enter that DN in the Directory Number field.

Step 9 Under Route Partition, select your city's Headquarters Partition.

Step 10 Under Directory Number Settings choose a CSS of appropriate access.

Step 11 Enter any Call Forward and Call Pickup Settings as necessary.

Step 12 In the Display (Internal Caller ID), enter the User's name that was created in a previous Lab.

Step 13 Click Save.

 

 

 

 

 

 

 

 

 

Step 14 From the Related Links: menu, select Subscribe/Unsubscribe Services.

(#step 13 적용 후 바로 related links 가 보이지는 않는다. 따라서 device 에서 다시 검색해 들어가 선택하여야한다.)

Step 15 In the Select a Service, select Extension Mobility, then click Next.

 

 

 

 

Step 16 Click Subscribe.

Step 17 Click Save.

Step 18 Repeat steps 7-13 for any additional lines.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Task 6: Associate User Device Profile to a User

Step 1 From the menu, select User Management>End User.

 

Step 2 Click Find

 

 

 

 

 

 

 

 

Step 3 Select the user from the list that matches the profile that was created.

Step 4 Under Extension Mobility>Available Profiles, select the profile that was created in the previous exercise and move it to the Controlled Profiles selection.

Step 5 Under Default Profile, select the profile.

Step 6 Click Save.

 

 

 

 

 

 

 

 

 

 

Task 7: Configure and Subscribe Cisco Unified Ip Phones to Service and Enable it.

Step 1 Select Device>Phone from the menu.

Step 2 Select the phone from the list of devices.

 

 

 

 

 

 

Step 3 In the Related Links: field, select Subscribe/Unsubscribe Services and click Go

Step 4 In the pop-up window, under Service Information, in the Select a Service pull down menu, select Extension Mobility.

Step 5 Click Next

Step 6 Click Subscribe

Step 7 Click Save

Step 8 Close the pop-up window.

(#step4 ~ 8 까지는 앞에서 했던 과정과 동일하므로 생략)

Step 9 Under Extension Information , check the Enable Extension Mobility box.

Step 10 Under the Logout Profile field, select ? Use Current Device Settings ?

(#log out profile을 설정하면 , 폰에서 log out 시 설정된 profile의 번호로 돌아간다.)

Step 11 Click Save.

Step 12 Click Ok from the pop-up warning.

Step 13 Click Reset

Step 14 In the pop-up window select Reset.

Step 15 Click Close.

 

 

Extension Mobility 이해

IP-Phone 은 EM 을 통해 Login 하기 전까지를 Logout 상태로 인식한다.

Logout 상태에서 두 가지 선택권이 부여 된다.

1. IP-Phone 의 Line 에 설정되어 있는 DN 을 Logout 상태에서 표시

위의 상태에서 EM 은 Enable 되어 있고, 별도의 Profile 이 설정되어 있지 않은 경우

Line 에 설정되어 있는 DN을 Default 로 받아 온다.

위 표에서 Extension Mobility 설정을 enable 하지 않은 경우 Phone service 창에서 Login이 불가하니 Phone 설정에서 체크표시를 해야만 한다.

 

1. IP-Phone 의 Extension Mobility 설정란의 Default EM Profile 의 DN 을 표시

별도의 Default EM Profile 이 있을 경우 Device Profile 에서 EM Profile을 생성하여 설정 할 수 있다. Logout 상태에서 Default EM Profile을 사용하기 때문에 Phone Configuration 에서 설정한 DN은 무의미 하다.

또한 Default EM Profile은 Enduser 가 없어도 무방하다.

 

이렇게 설정된 IP-Phone 은 EM 을 서비스 할 수 있는 준비가 되어 있다. Login을 위해서는 DN 설정을 위해 개별 Device Profile 과 Login을 위한 End User 가 필요하다.

Device Profile은 실제 사용자의 전화 설정이 들어간다.